 |
 |
| The amount of slab surfaces built with the cobiax technology is increasing constantly. Please discover our latest projects. |
|
|
 |
| |
 |
|
Hall of «Hospital del Mare», Naples (IT)
arch. Pasquale Manduca, arch. Maurizio Magnetta, IaN+ (arch. C. Baglivo, ing. S. Manna, arch. L. Galofaro) - ing. Biagio De Risi, ing. Carmine Mascolo, ing. Gioacchino Forzano |
|
| The three storied building has a circular shape. The last two floors have three big holes with diameters up to 12 meters. |
|
|
|
|
| |
 |
|
New Faculty of Letters, L’Aquila University (IT)
Studi e Progetti Italia Srl, Arch. P. Cesarini, Arch. C. Carpineto - Dott. Ing. Antonello Salvatori |
|
| Thanks to the reduced mass of the cobiax slab, the shearing force on the supporting elements has been reduced and the anti-seismic isolators could be set, thus giving a better seismic protection to the whole building. |
|
|
|
|
| |
 |
|
Centro produttivo EIDOS Due, Chieri (IT)
R.V. STUDIO - Ing. Antonio Vigliani, Torino (IT) |
|
| The buidings' structure has to bear large imposed loads of up to 12,0 kN/m² due to the nearly exclusive industrial use. |
|
|
|
|
| |
 |
|
Office building Palazzina, loc. Bassona (IT)
Studio Mazza – Arch. Pierdomenico Mazza, Verona (IT) |
|
| Due to the too large deflection and despite a beam along a free slab edge, one had to recourse on the biaxial Cobiax Technology. Further to the statical solution the cobiax slab offers advantages on installation. |
|
|
|
|
| |
 |
|
Commercial Centre Settevalli (IT)
Architect Arch. Paolo Lucciconi (IT) |
|
| In view of the distinctiveness of the building with an exposed perimeter steel beam between the first and the second floor on about 6 m height, the lightweight flat slab solution of cobiax has been crucial for an optimised realisation especially considering the new seismic standards. |
|
|
|
|
| |
 |
|
Ubiale Clanezzo, Bergamo (IT)
Architect Atelier Bruno Vaerini (IT) |
|
| The residential house can only express the architectonic serenity thanks to cobiax. Moreover, the functionality was increased considerably by eliminating disturbing columns. Both aspects lead to a significant added value of the building. |
|
|
|
|
| |
 |
|
Iprona, Lana (IT)
Dr.Arch. Wilfried MORODER, Bozen (IT) |
|
| The concept of pre-assembled cobiax modules CBLM achieved a reduction in production time of 30% compared with the solution where weight reducing elements would have to be assembled and placed on site. |
|
|
|
|
| |
|
|
| |
|
|
